Control Switch for O22 Turnout

EJKOGR Forum Member DIGITAL SUBSCRIBER

I would like to use a smaller control switch than the Lionel OEM to operate my O22 turnouts. Does anybody know the current draw of the switch solenoid? Or any recommendations for switches that can be used? Since most of my turnouts are Ross with DZ1000 controllers I was wondering if I could use the DZ1002 control switch to operate my Lionel. Then all control switches would be alike on my control panel.

5/30/127:47 PM

❤️ 0

Original Post

Replies sorted oldest to newest

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

A standard C&K (or clone) mini toggle will do fine. You want a SPDT center off model with the "return to center" feature, aka momentary contact each way. The mini switches are rated at 6A, more than sufficient.

5/30/127:53 PM

❤️ 0

RailfanRonOGR Forum Member

The DZ-1002 is a SPDT switch but I believe it is not a momentary contact type. You can check this with an ohmmeter.

Ron

5/30/128:54 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!