Skip to main content

Replies sorted oldest to newest

This will all depend on the features you want, plus you’ll hav to come up with a way to have an outside isolated antenna …..there’s a couple proven methods for antennas, ….biggest thing think about is what features you want, and how much Do-Ray-Me you’re willing to sink into it,…..there is no provision on TMCC kits ( ERR CC, CCM, etc. ) to make chuff, or drive a fan driven smoke unit,…..that will have to be add on system such as The Super Chuffer and Chuff Generator …….so the biggest question is, what features do you want?…..sound? Smoke?..etc. etc,..

Pat  

@harmonyards posted:

This will all depend on the features you want

Pat  

I would want sound and smoke and remote control.  Would it be easier on a Protosound 3?  The reason I ask is that I’m tired of waiting for Pennsylvania Turbine that will work with TMCC or LionChief Plus.  By the time they get around to it it at Lionel will be either too big for my layout or $1,200.

Well, ….yes it would be much easier to swap it to PS3, as no crazy modifications will have to be made, plus PS3 encompasses all you want in one convenient package, albeit a smoke unit, ….if this was a PS1 engine, the entire smoke unit will need to be swapped out for a PS2 style unit,….problem is, PS3 kits are not available easily at the given moment, and we’re not really sure when they will be……but given you want TMCC, it’s not out of the realm of possibilities, ……Alex M. on this forum does TMCC swaps, as do a few other techs,….unless you plan on tackling the swap yourself….

Pat

Alex works on my stuff.  He said that it would require a complete gut.  I don’t have DCS and don’t plan to spend hundreds for it if and when it becomes available. I have a few Legacy Cab2 sets and that’s enough foe me.  I guess if I can get a good enough price on the locomotive I can spend the money for the overhaul.  Thank you.

I've "walked in your moccasins" and considered a "brain transplant" control system swap for a MTH diesel switcher with DCS to Lionel's TMCC with Railsounds.  Since I'm a novice, I opted to have the work done by an experienced technician -- GunRunner John, who is a frequent contributor to the OGR FORUM. He did the conversion is good time and at a reasonable price. When the MTH SW 1500 diesel switcher was returned after "surgery," I tested it on my TMCC-equipped layout with my TMCC CAB-1. It worked perfectly.

I realize there are hobbyists/collectors who have the skill set required to do this task.  But I'm not one of them. IMHO, humility is good for the soul and often for the wallet; i.e., "I'm not able to do this task on my own."

Mike Mottler   LCCA 12394

Sure, there could be a market, however, a new problem exists. PS3 units use the wireless 6 pin PCB drawbar system. Older units used a 10 pin system or even older used the tether system and metal drawbar.

Depending on how and where you mount the TMCC components, the drawbar system as is with PS3 could be a limitation or yet another piece you need to modify and change.

A PS2 with either the 10 pin or the wired tether has been more appropriate and easier IMO.

Also when selling the electronics, IMO more valuable with an intact harness system, so if you borrow parts and pieces of the wiring for the conversion and not sold with the boards as a system- then less value.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×