Skip to main content

Hello Everyone, I picked up the CTA Cubs set and I wanted to change the battery. I have done procedure on most of the MTH engines I have that needed it - but this is the first one I am doing for a Subway unit. Please see photos below - I opened it - I do not see the battery? The operating instructions have a section about replacing the battery but no diagram. Is there some battery eliminator upgrade board I am not aware of, or am I just blind?

098C1C9D-4C03-4E15-948F-6957E322FA6CA02EF60D-B8DC-4473-889F-AB578D7A1A59C025E190-97CA-4122-8C21-230213E48FEC7A103728-1D2B-48BC-AA1C-E2F1CEC9E969

Attachments

Images (4)
  • A02EF60D-B8DC-4473-889F-AB578D7A1A59
  • C025E190-97CA-4122-8C21-230213E48FEC
  • 7A103728-1D2B-48BC-AA1C-E2F1CEC9E969
  • 6026E95F-2702-4F01-8E1A-2CEF7D847DA6
Original Post

Replies sorted oldest to newest

Add Reply

Post
This forum is sponsored by MTH Electric Trains
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×