Skip to main content

Greetings All,

The DCS Loader cant find my TIU therefore I am unable to load the latest upgrade.

Now some facts:

My TIU is version 13A

I am powering the TIU through Aux Power

It is currently loaded with DCS version 4.1 (At least that is what I believe since that is what my remotes version is)

I have downloaded and installed DCS Loader version 5.0.0 (the latest)

I am using a RS232 Serial to USB cable and have downloaded the driver software for the cable

My computer is finding the Cable on a COM port (initially it was on COM3 but then I switched to a different USB port while trouble shooting and now on COM4)

I am running Windows 10 Home.

When attempting to find the TIU through the options menu it cycles through COM1 and  COM4 (com4 is the current address for the cable) and then times out and recommends cycling the Power on the TIU which I do and the same thing happens after about 45 seconds of searching.

I am at wits end and am trying to figure out if it is a computer or TIU problem.

 

Any help or suggestions would be appreciated.

Thanks again,

Ed

 

Original Post

Replies sorted oldest to newest

send me an email I live in new jersey and I'll walk you threw your issues I need to know what kind of computer your using which version of windows is your  computer have the latest updates. I also  repair and sell computer and can help you with theses issues your have. email and send me your phone number in email and I'll call you and get you going!

it could be just as simple as you don't have the driver for usb port which is on the mth web sight, I have the driver if you need it

Alan

Last edited by Alan Mancus

Alan,

Thanks for the offer.  I sent you an email with some additional info about my computer and my contact information.

Alan Mancus posted:

send me an email I live in new jersey and I'll walk you threw your issues I need to know what kind of computer your using which version of windows is your  computer have the latest updates. I also  repair and sell computer and can help you with theses issues your have. email and send me your phone number in email and I'll call you and get you going!

it could be just as simple as you don't have the driver for usb port which is on the mth web sight, I have the driver if you need it

Alan

Thanks for the rest of the replies.  I did follow the instructions as stated on the loader program several times and still no joy!

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×