Skip to main content

This tip card will help me do all Setup items.  Maybe it can help others.

" TIU System Setup Tips
 from 5th Edition of MTH Operator's Manual

TIU Power and ID - P. 8
    Power Indicator - "Red LED light blinks at initial power up. The TIU address
         corresponds to the number of times the Red LED Blinks."

Remote Setup - P. 79 (see note at page bottom.)
      at REMOTE MESSAGES - click softkey ON
      at OPERATING MODE - choose SPEED or NORMAL (try best one for you)

TIU Setup (for every Remote) - P. 73
       With TIU power on, Edit TIUs one at a time.  
          at Super TIU click SUPER TIU

DCS Setup (for each TIU)
      P. 74   Choose AON (All On for DCS signal).
          AOF (All Off for DCS signal, NOT All On Fixed),
          Set each Variable Output to FXD (fixed) one at a time."

Original Post

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×