Skip to main content

I built the Watchdog Generator and put it on the DCS Remote Commander. The instructions with the commander show power being applied to the commander which powers the track. Do I just pull a power supply from the power to the TIU (from the transmitter) and make a parallel connectionon to the track. Or should I connect to the fixed output #2 from the TIU and pull power that way and make a connection to the buss to the power blocks. I'm confused here as you can tell. A simple diagram might help. Thanks, Dennis

Original Post

Replies sorted oldest to newest

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×