Skip to main content

Diecast model of a typical "City Transit Bus" in 1:64 scale.

 

This is a diecast model that is similar to a modern "city bus".  The model is lettered for "New York Bus".  It is 6 inches long bumper to bumper. The wheelbase is 3-1/2 inches. Although the scale of the model is NOT marked on the casting a comparison with the prototype bus wheelbase data indicates that it could be 1:64 scale. The manufacturer name imprinted on the base of the diecast model is "Shing Fat Huiyang".

 

A typical prototype city transit bus is shown.

  

New York City prototype bus 1

New York City prototype bus 2

000_8316

000_8317

000_8318

000_8319

000_8320

000_8321

 

Attachments

Images (8)
  • New York City prototype bus 1
  • New York City prototype bus 2
  • 000_8316
  • 000_8317
  • 000_8318
  • 000_8319
  • 000_8320
  • 000_8321
Last edited by pro hobby
Original Post

Replies sorted oldest to newest

Mark;

That appears to be a model RTS produced from 1977 till May 1987 in the US, none in Canada.  That one has air conditioning - the rear is flat rather than chopped at an angle same as the rear window.  The RTS units with no AC had an angled rear wall.  You can thank the US government for the change in bus models from the new look.

I bought a few of these "fishbowl" buses at my local CVS a while ago too, and they're not quite to scale.  I also ordered some online that were advertised as 1:64, but they were the same casting as the previous ones.  Bummer.  They scale out to 32.5' bumper to bumper and about 7' 3" wide.  A six-footer would have his chin at the bottom of the window sill.  Close, but no cigar.  I gave them to my grandson to play with. 

 

With all the nicer 1:64 vehicles out there, notably, the M2 line, it's surprising that no company has made a well scaled out bus yet.  With all the talk out there of the lack of buses, you'd think that would be a good opportunity.  Hey, M2, are you listening?

 

A few years ago, Norev made a beautiful version of the GM Futurliner, admittedly a rare vehicle to begin with.  Only 12 were made for GM's Parade of Progress.  Now, if a company could make such a low production vehicle, why not a more common version like the "Fishbowl" bus that saw usage all over North America?  By the way, along with the Futurliner, I also have a set of the GM concept cars from the 50s.  It makes a nice display in the City Park on my layout.  I just need to find a set of figures of little boys drooling over the cars... in 1:64 scale, of course. 

 1-64 Futurliner

And for those who missed on getting a Futurliner, Fairfield Collectables is coming out with one very soon. 

 

Attachments

Images (1)
  • 1-64 Futurliner
Last edited by poniaj

You should have got the Corgi American buses. They were 1:50 and very well detailed. Old style GMC and Fishbowl. They had them in all bus companies from Chicago CTA,Philly PTC and Septa. New York was well served with NYCTA,Board of Transportaion,Liberty Lines,Triboro,Green bus and others. They are rare now because of the limited runs and poor sales.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×