Skip to main content

My Legacy NYC Geep was acting erratically. Starting, stopping sputtering. I was worried if the board was going .....I knew the track was not an issue.....it had been recently cleaned.

Luckily, I thought...........could it be the wheels?

I put the engine in a cradle. First, I cleaned the rollers; then, the wheels.

I was amazed at what I found......

BE6A194B-734C-4220-B1BF-5FA98401F8ED

It runs fine, now!

Since I typically run engines for a few weeks and then put them back on the shelf, I need to get into a habit of regular wheel cleaning when the run time is done.....

Peter

Attachments

Images (1)
  • BE6A194B-734C-4220-B1BF-5FA98401F8ED
Last edited by Putnam Division
Original Post

Replies sorted oldest to newest

@Putnam Division  Peter, good suggestion on keeping Locomotive wheels clean.  I also started out cleaning wheels with Q-tips.  Later I discovered inexpensive microfiber rags (14" x 14" Cleaning Towels) work very well and one of them can clean a lot of wheels.  They're also great for all kinds of cleaning tasks, even track.  I usually find them in packs of 10 or more at home improvement stores.  When they get too dirty, they go in the laundry and then get used again, etc.

Last edited by SteveH

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×