Skip to main content

I bought this Downtown Deco Trackside Tavern building that needed some TLC.  No signs were included so I made my own in photoshop elements and picked up a few images from the web.  All were printed on a color laser printer. 

I decided to make this a 1950s TV and Radio Repair Shop in honor of my dad.  He was trained as an electronics engineer and managed defense contracts for the Navy Department.  At the start of his career in the late 50s/early 60s, he did TV repair in our basement.  I learned a lot from him, including which end on the soldering iron not to grab.   I do wish I had kept his old tube tester in wooden case.

I did a repair and repaint, new roof and rooftop details, downspouts and the signs.  Still needs some weathering chalks.

Here are the before and after pictures.

IMG_2846IMG_2847IMG_2874IMG_2875

Bob Glorioso

 

Attachments

Images (4)
  • IMG_2846
  • IMG_2847
  • IMG_2874
  • IMG_2875
Original Post

Replies sorted oldest to newest

Thanks guys.  This is my 6th Downtown Deco building.  3 were rescue/refurbs and 3 were built from kits.  They are a lot of fun to build and if you follow Randy's instructions, they look great.  For anyone who is thinking they might want to try their hand at a hydrocal plaster building, start with the First Timer Bar.  It is a small, easy to do kit with a lot of character. 

Bob

Dkdkrd, Of course, every bit of it looks great, and I especially enjoy the boldness of your writing "No Parking" on the rear of the building exactly like a proprietor of such a modest business might have done with a simple paintbrush and some leftover black paint. That looks completely authentic, as a realistic touch.

FrankM

RRDOC posted:

I bought this Downtown Deco Trackside Tavern building that needed some TLC.  No signs were included so I made my own in photoshop elements and picked up a few images from the web.  All were printed on a color laser printer. 

I decided to make this a 1950s TV and Radio Repair Shop in honor of my dad.  He was trained as an electronics engineer and managed defense contracts for the Navy Department.  At the start of his career in the late 50s/early 60s, he did TV repair in our basement.  I learned a lot from him, including which end on the soldering iron not to grab.   I do wish I had kept his old tube tester in wooden case.

I did a repair and repaint, new roof and rooftop details, downspouts and the signs.  Still needs some weathering chalks.

Here are the before and after pictures.

IMG_2846IMG_2847IMG_2874IMG_2875

Bob Glorioso

 

Wow', that is a real nice paint and sign job'..Very nice work'.. Best conversion of that kit I'v seen to date'..

Last edited by Quarter Gauger 48

Bob, nice job.  The connection with your Dad makes it even more special.  One tip for making home made signs look like they're painted on is to print them on paper, turn the paper over and sand with fine sand paper to make it thinner then apply with white glue and work the thinned paper into the relief of the brick work with your finger tips.

I believe Jim Policastro either posted about this process here or I read it an article about his layout.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×