Skip to main content

Replies sorted oldest to newest

I use the $7 Harbor Freight tool with those thin cut-off discs daily.  If I am careful, I can also drill teeny holes with the thing for handrails.

There is no other tool around here that can cut cab windows in .020 brass.  I did have the $60 Sears model with better speed control, but it died.

One has to be careful with Harbor Freight, but some of their tools are truly spectacular bargains.  This and the small cast iron drill press are essential tools for a hobbyist or aircraft restorer.  I have had lousy luck with their spray guns and bench sanders, but these two I depend on!

I wanted a Dremel with slow speed settings and bought a Model 3000 with 5 speeds. The single speed models run too fast. I just paid the price for it at Home Depot.  It came with a plastic case and a bunch of bits.  I think the same model was $10 cheaper at Wal-Mart but I don't know what accessories were offered at Wal-Mart.

Having had other brands, I agree with the above advice to stick with Dremel.  I have both a top-of the-line rechargeable and a TOTL corded.  The rechargeable was adequate but there was a great sale on the corded and it cuts rail faster.  Both are continuously variable speed, from very slow to very fast.

Avanti posted:

I'm not sure I would by a HF tool, but that is the ONLY place to buy expendables such as the cut-off disks, grinding bits, etc. Dremel seems to subscribe to the "give away the razor and sell the blades" philosophy. The tools are way overpriced, and the HF ones are just fine at a fraction of the price.

I have no problems finding all the above at Home depot

 

I swear by my Dremel 8220 battery tool.  It's the first battery powered one that I've been high on.  Gobs of power, and no power cord to get in the way.  I also have a Dremel 4000, but it doesn't come out often, the battery powered one is so good!

Once you get to use a good battery powered tool, you'll wonder how you ever used a corded one!  I recommend a second battery, and there's even a spot in the case for the backup battery.

Attachments

Images (1)
  • mceclip0

I love my Dremel...no battery on mine, it's an older electric one. 

Nick, you said you needed to do some cutting work. Buy a couple of the fiberglass reinforced cutting wheels. They are fantastic. I had a (real/full size) Yard Limit sign where the bolts had frozen to the post with rust and 2 of those wheels cut through 4 heavily rusted bolts in around 2 minutes time. Always wear goggles, too. 

Tom 

Last edited by PRR8976
Catdaddy posted:

Just bought one at Dremel website. 40% off black Friday........is a saw or oscillating tool a handy item

I uses the Dremel saw that came in my Dremel 4000 kit, once or twice, but it's not high on my list of the most useful accessories.  The Dremel accessories I find useful are the 90 degree attachment and the flexible wand.   I have also used the planer attachment a number of times, it's perfect for shaving doors when the builder is sloppy and they stick.

If I were doing a lot of carpentry, the oscillating tool would be useful, but I don't really need one. However, I doubt one attached to a Dremel would be all that useful, the oscillating tool needs significant power.

Rusty Traque posted:

Been using my Dremel 280 with the no longer available 219 solid state speed control for about 45 years.

The Dremel 4000 has speed control build in, I find that useful when I have some really heavy duty grinding or shaping to do.  It's speed control is really speed control, when you increase the load on the tool, it pours on the juice to keep it running at a constant speed, very nice feature.  I believe the #219 is not not a constant speed controller, just a variable voltage controller.

gunrunnerjohn posted:
Rusty Traque posted:

Been using my Dremel 280 with the no longer available 219 solid state speed control for about 45 years.

The Dremel 4000 has speed control build in, I find that useful when I have some really heavy duty grinding or shaping to do.  It's speed control is really speed control, when you increase the load on the tool, it pours on the juice to keep it running at a constant speed, very nice feature.  I believe the #219 is not not a constant speed controller, just a variable voltage controller.

Maybe so, but with the 219 I can crank down my old 280 to slower than any Dremel with the speed control built in.  Handy when drilling with #76-80 size drill bits.

Rusty

Last edited by Rusty Traque

CatDaddy,

I use my Dremel saw all the time, it is the perfect tool when trimming custom length track, is handy around the house for small plumbing and soldering cuts, and will cut plywood, it is definitely for small and short cuts, but so much handier than a skilsaw for minor projects.

I've had my saw since 2013 and it gets used a lot, Walmart, depending on the store, carries as much accessories as Home Depot or hardware stores for Dremel. We have a dozen stores within 25 miles and each is different, depending on their sales volume probably, as to the amount of accessories they display.

My late wife gave me the basic Dremel for Xmas in 1984. Soon after I bought the Dremel variable speed controller for it. Used it for building my railroad starting in 1987 which included cutting a lot of Gargraves track and many scratch building projects. It finally wore out about 5 years (2014 -15) ago, and I sent it back to the factory for rebuilding. $30 later Dremel sent me a new Model 200 tool (the basic model). To me Dremel means quality and service. Now if Santa will bring me the 90 degree attachment.

I have a few  second hand Dremel Moto tool grinders.  But for heavy grinding I use an old Ryobi multispeed grinder.  It seams more robust and heavier duty.  All were bought at garage sales cheap.  I have also picked up a few Dremel kit boxes with lots of cutting tools, all missing several tools and the Dremel Moto tool grinder of course.

Charlie

Last edited by Choo Choo Charlie

Choice depends on where you'll be using the tool.  I have 2 modern-era Dremel moto-tools:

1. a #8000 10.8 volt, quite a few years old but the lithium ion battery still is fine.  Has plenty of power for most all jobs, but with heavy jobs, it will occasionally have the internal breaker pop, requiring a reset by turning it off & on. It's handy to work on the layout, or on a boat away from 120VAC power.

2. A corded 4300, which has noticeably more power than the 800, but of course requires a cord.

I recommend either if the budget allows.  Both are variable speed

I am with a John on the cordless one.  I have had a battery powered one with variable speed for maybe 5 years now.  I could not imagine going back.  Plenty of power. I understand if you already have a corded one, but if you haven’t bought yet, go for the cordless.

It kind of reminds me of the cordless drill, used to be it didn’t stand up to the use but today who uses a corded drill normally?

Rich883 posted:

It kind of reminds me of the cordless drill, used to be it didn’t stand up to the use but today who uses a corded drill normally?

I still use corded drills.  Like I say, using a corded tool means always having a fully charged, 110 volt outlet available anytime, anyplace.  No expensive, rechargeable batteries needed. 

Reluctantly, I have to agree with the "I use a cord" gang. I am generally pro-tech, but I have been burned over and over again when going out to buy a replacement battery after a few years only to discover that the manufacturer has changed the voltage and/or connector of their tool, and I could no longer buy a battery when I needed it.

Maybe things have settled down, but once burned twice shy.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×