I have these DZ-100 turnout controllers. 

Don't need them, because all my Gargraves turnouts are set up for manual operation. 

Id like to test these-see if the work, but I don't have the controllers  

Can I connect an MTH Turnout controller to test them?

if so, is it 

red to red

green to green

yellow to black

 

And how do I get power to them?

 

Attachments

Photos (1)
Original Post

For the DZ-1000, the red wire goes to one side of the transformer, and then the yellow or green wires are connected to the other side to operate the motor.  Alternately connecting them will move the arm and lever back and forth if they work.  They operate on 12-20 VAC.

This is a "complete" wiring diagram for the DZ1000 with the associated pushbutton switch.

Attachments

Photos (1)

Add Reply

Likes (0)
Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×