Skip to main content

I have read in a DZ document what I believe is a fix for dim or unlit DZ leds in circuits where the switches have been wired for non derailing function.  If I understand correctly, wiring the DZ push buttons into the circuit even though the switches are controlled by a TMCC SCII and the derailing wiring, will modify the circuit in such a way that the LEDs will lite brite and stay on.  Do I understand this correctly?

Original Post
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×