Skip to main content

I'm embarrassed to have to ask this, I should know it, but what is the input voltage for a PS-1 smoke unit (the kind with the built-in board). Does it run off track voltage or constant voltage, and if it's constant voltage, how many volts and is it AC or DC into the 2-pin connector on the board? 

 

Thanks, and I promise to write it on a 3x5 card and put it next to my bench so I don't have to ask again.

Original Post

Replies sorted oldest to newest

I burned up one of the little fan motors running it on a high voltage. Sorry to say this, but everything I have (Premier MTH) is run off straight, filtered DC. I gave up on the fancy schmantsy circuit boards years ago. With two large diesels and 20 cars, I'm only putting 5 to 6 volts into the track, and their smokers work great at that power. 

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×