Skip to main content

I need some feedback and a second pair of eyes on this layout I am planning! I have a layout that is full FasTrack and I am making the switch.

Looking to incorporate a lot. I have a pretty set space in an unfinished basement. The yard is under the stairs. Dark grey rectangle and circle are HVAC and water heater.

Using Gargraves/Ross

Min curve on the outside main is O72 

Min curve on the inside main and elevated track is O56

Track colors - Dark green is at 0"-2". Lighter mint green is grade. White is at 10". 

 

Let me know what you think!

 

Edgewood Railroad - Track Plan

Edgewood Railroad - 3D

Attachments

Images (2)
  • Edgewood Railroad - Track Plan
  • Edgewood Railroad - 3D
Original Post

Replies sorted oldest to newest

@Ted S posted:

Nice!  Is that some kind of helix around the mountain at right?  Also, what kind of software did you use to create this design?  It's a little hard to get a sense of the detail in the middle of the layout.  Any chance of sharing the original file?

Yep! It is a helix.

I used RailModeller Pro on a Mac. I don't have a PC and this is a Mac-specific program. Here is the file. Maybe you can open it?

I know what you're saying regarding the detail. It contains a station, transfer table, and then I tried to draw in some roads and roundabouts.

Attachments

Unfortunately I don't have a Mac, just PC. 

Really it's a nice plan and you have a lot of space!  My concern with the circular helix is this: if its diameter is 56" and you allow 6.5" (suggested minimum) between turns, that works out to a 3.7% grade.  On an O56 curve.  Not impossible, but steeper than I would prefer.  Depending on train length you might shed a few rubber tires every now and then. 

If you could sneak one track width behind the water heater, you could have a separate, oval-shaped helix with a longer run between successive turns.  This would reduce the steepness of the grade. Train goes behind the heater, and comes back on the upper level!

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×