Once all trains are stopped and off, does it do the system any harm to use the Legacy controller Emergency Shut-off button to turn off all four throttles of my ZW at once? I don’t want to move the set throttle positions- each at a different voltage and not take the time to individually shut down each one using the velocity wheel on the controller. Thanks for you suggestions.
Replies sorted oldest to newest
No harm at all, I suspect you'll have to remove power to the ZW and turn it back on to get the throttles back to the set positions.
The ZWC will return to the B and C settings by turning back on the power after turning off the power. The new ZWL requires turning off the power and then returning all the handles to zero before resetting them. That is the reason I do not use the new ZWL. I will continue to use the ZWC with the digital readout (and erroneous current meter) until it breaks...then use just the bricks I guess.
You can't assign TR IDs to the ZW posts?
Access to this requires an OGR Forum Supporting Membership
