Skip to main content

I have an early 2000’s TMCC Lionel Dash 9 that had the flywheel magnet ring break on me. I ended up replacing the motor so I swapped everything that was connected to the original motor to the new motor but now when I power the engine up, it doesn’t respond to my tmcc commands. I placed the engine on a track only powered by a transformer and it wouldn’t run there either but the horn and bell worked when I used the transformer buttons. Any idea on what could be causing this? I don’t believe it’s my tmcc because all my other engines work as normal.

Original Post

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×