Skip to main content

This might be a message for ERR but I installed an ERR cruise commander and then added a Super Chuffer 2 and CG.  the front light LEDs work great off the Super Chuffer 2, however never got around to connecting Rear light to terminal 5 and 6 since was waiting for 3 mm LEDS that fit in tender.  I Just installed and the rear light seems to be on all the time.  Shouldn’t it only be on during reverse?  Tried a 12 v incandescent too and was very bright like almost burn out bright.  Put a volt meter on it after disconnecting light and getting like 17.6 volts.  Not sure what else to try except maybe reset the feature code again.  I have not reset since installing CG and Super Chuffer, or connecting the rear light. Still also getting a weird chuff at very low speed that does not seem to be coming from CG, but now with the rear light issue I am afraid something is screwed up.  Any ideas from the experts out there?

Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×