Skip to main content

"HONGZ" stands for HO scale, N scale, G scale, and Z scale.

Post your non-O scale stuff here!

Replies sorted oldest to newest

@PGentieu posted:

Nice.  I think MTH's HO 3-rail AC Märklin-compatible line didn't get much attention but it added many North American prototype locomotives to the limited range available from Märklin.

MTH HO North American Prototypes were a hit with Marklin enthusiasts. I been looking everywhere for 3 rail HO and its hard to locate any. I have a Challenger,  F3 AB and the GS2.

Marklin to my knowledge made it popular as a format and then MTH built a fair amount of HO European style locos that were compatible to that style of track system. One difference compared to O scale 3 Rail is we typically use roller pickups and roll on that 3rd rail. With the rivet or other contact system in the HO 3 rail design, they need a sliding long shoe that contacts multiple rivets to ensure constant and reliable power pickup.

Here is the slider shoe on a HO 3rail diesel

Attachments

Images (1)
  • mceclip0

Screen grab from the video showing the rivet contacts down the middle of the track.

@FatBoy Nice video and thanks for sharing. I also was impressed by the layout with the catenary overhead system.

I only have one MTH HO PS3 steam engine, but it's the NKP Berkshire with whistle steam. Yes, 2 rail, not 3, but I have a lot of respect for 3 rail.

Attachments

Images (1)
  • mceclip0

Is that running in DCC or DCS? I’ve only run my Challenger conventionally so far and it doesn’t smoke that well. I’m guessing the higher voltage of command helps.

Steve

Steve, it runs on a Marklin Central Station 2, under DCC.

It has a default code of 03 and the CS2 picks it up automatically. You have to just assign it a different number because all MTH 3 rail AC leave the factory as 03.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×