Skip to main content

@Craftech posted:

Do you mean Foam? or rubber?

John

I have heard of foam.   The idea being you sticky side of the foam to the layout base and it raises the track slightly.  Then you don't need to nail or screw down the track since the foam weather stripping keeps it from sliding around.

I saw this suggested in tinplate times or somewhere similar but have not yet tried it myself.

@jhz563 posted:

I have heard of foam.   The idea being you sticky side of the foam to the layout base and it raises the track slightly.  Then you don't need to nail or screw down the track since the foam weather stripping keeps it from sliding around.

I saw this suggested in tinplate times or somewhere similar but have not yet tried it myself.

Not sure how it can raise the base when foam is so soft and compressible.  Unless you are referring to a different type of foam, maybe closed cell foam?

I use the 1/4" x 1/2" Basswood Strips,  Bought at a local craft store. Been a while since I looked for 'em, so don't know if they are out of stock.   I had bought a bunch of the Screen Molding and cut a lot of ties, but decided they didn't look right.  They match the width of the metal Tie at the bottom, but too wide to match the top, which is what you see above the ballast.  So, I went with the 1/4" x 1/2"  Cut scrap pieces to fill in the open end of the metal tie.

My first try to see how it looked.

IMG_1776

I cut the un-couple magnets out of O-27 Track, and splice them into my O Track

IMG_3863



IMG_1565



IMG_E7173



IMG_0371

So, That's how I did it.

Steve

Attachments

Images (5)
  • IMG_1776
  • IMG_3863
  • IMG_1565
  • IMG_E7173
  • IMG_0371
@Craftech posted:

Those look nice Steve.   Midwest Products are out of stock right now so some of the vendors are breaking up the 12 packs and selling them apiece for an inflated price.

John

Thanks,

The Local Craft Store carries Midwest Products,  I never saw "12 Packs"  The store has a set of shelves, with dividers with the different size wood products, but individual pieces.  So, would go and grab an assortment of pieces, depending on what project I was working on,  like cutting Track Ties, or need wood for scratchbuilding.  I have several cardboard tubes under my bench work with an assortment of basswood and some balsa.  Also, the flat 3" wide sheets.  So, when I get an idea for a project, I got some inventory to look through.

Steve

@Steve24944 posted:

Thanks,

The Local Craft Store carries Midwest Products,  I never saw "12 Packs"  The store has a set of shelves, with dividers with the different size wood products, but individual pieces.  So, would go and grab an assortment of pieces, depending on what project I was working on,  like cutting Track Ties, or need wood for scratchbuilding.  I have several cardboard tubes under my bench work with an assortment of basswood and some balsa.  Also, the flat 3" wide sheets.  So, when I get an idea for a project, I got some inventory to look through.

Steve

Thanks Steve.

I'll go check that out at my LHS.

John

The ones mentioned in DGjones Post above from Moondog Streets are perfect for what you want! I used them on my last Layout under the Lionel 3Rail Track.  If you can get them at a good price, go for it ! Just make sure he has enough to finish your Layout as the Co. is no longer in Business & you can’t get additional!

FREDSTRAINS

@Fredstrains posted:

The ones mentioned in DGjones Post above from Moondog Streets are perfect for what you want! I used them on my last Layout under the Lionel 3Rail Track.  If you can get them at a good price, go for it ! Just make sure he has enough to finish your Layout as the Co. is no longer in Business & you can’t get additional!

FREDSTRAINS

Thanks Fred,

I just bought a bunch of them from Don.

Regards,

John

I use grey roll roofing material for my ballast and if you turn it over it's black. Cut your ties any size you need (cut from the back, score the roofing then snap it off)

One thickness is good for O27 and put two together for O Gauge. Depending on the thickness of the roofing you can just put the ties in place and screw down your track to hold the ties in place, If the roofing is a little thin put a dab of caulking adhesive on the ties.

If you can find a roll of damaged roofing , you can usually get it for a discount.

IMG_0930IMG_0931IMG_0932IMG_0933

Attachments

Images (4)
  • IMG_0930
  • IMG_0931
  • IMG_0932
  • IMG_0933

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×