Skip to main content

Replies sorted oldest to newest

Better operation of the eunit can be obtained by adjusting the tension on the shoulder pivot screw. That screw is threaded into the hard fiber contact plate. It is then locked in place with a nut. To loosen up the operation loosen the nut and back the screw out about a 1/4 turn. Then while  hold the screw head from turning, tighten the nut.  

Add Reply

Post
This forum is sponsored by Lionel, LLC
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×