foot print for 342-345 combo

kmarquisOGR Forum Member

I've been doing some rearranging of accessories on the super O portion of my layout. I would like to add the 342-345 combo but need to know the measurement of the combined units. I need the measurement from the center rail to the back of the base and the overall width of the combined units with the bridge attached. Thanks for help. If I could get the measurement from the front of the unit to the central rail I would appreciate that. I don't think that will be an issue, but it couldn't hurt to have it also.

6/16/1512:28 PM

❤️ 0

Original Post

Replies sorted oldest to newest

WftTrainsOGR Forum Member

The overall length of the 2 accessories connected with the ramp is 24 3/4". The overall width is 9 3/8". I use Super O too and the distance from the center rail to the front edge is 2 1/2". Be advised that last measurement is with the edge of the ties against the front edge of the channel and not centered in the channel. There's about 3/16" of space between the ties and the other edge of the channel.

Hope this helps,

Bill

6/16/151:30 PM

❤️ 0

kmarquisOGR Forum Member

Thanks, That's the info I needed.

6/16/156:31 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!