Skip to main content

Yes, for PS/2 sound files had much of the functionality, but internal and not user programmable firmware also defined basic functionality.  For PS/3, that firmware that used to be inaccessible by the end user was incorporated into loadable "chain files", while the sound files still remained largely the same.  So, for PS/3, there are actually two types of files to load, the sound file, and the chain files.

Yes, I believe so.
I powered up the locomotive pre PS3 instructions first tested horn bell, forward and reverse movement all was ok, I did have to correct the motor connections to get the correct direction but it is working as is.

there is some diesel files pre loaded .

when I try to load or save the files to or from the locomotive I get the no engine message

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×