I plan to mostly use Woodland Scenics incline sets but have to incorporate a few sections of Lionel's Incline sets. What is the grade of their sets so I can order the correct set from WS to match.
You can change it to 3.1% if you use one bent every two track sections.
I'm not really a fan of ties & rails just hanging between trestle bents, so even if you have a thin subroadbed like Masonite to support the ties, you can space out the bents to accomplish a custom grade of your choosing.
I use O27 profile track. On my ramps using the trestle set (or any other device) I use the longer 36" track sections which reduces the angle a bit. A long piece is comparable to 4 short pieces. I put one support at each end and one in the middle. Maybe I don't need the middle one but I'm always the paranoid one!
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!