Skip to main content

4 replies

Greasing location for gearbox MTH 20-20222-2

NM NKP MuncieOGR Forum Member SUPPORTING MEMBER

Pulled out of storage an MTH N&W U25B with PS3, 20-20222-2. I ran it a bit when I first bought it, but not in the last five or six years. I put a little oil on the axles, and some grease on the axle gears and idlers. Confused now about where else to grease. MTH steamers and three-axle (per truck) diesels I've seen have ports labeled "GREASE," but this loco doesn't.

The manual mentions removing two grease port screws (two per gearbox) and putting a small amount of grease in, but there are no pix of the ports - or at least they aren't labeled. Are those ports on the bottom of the truck, or are they accessed by removing the shell? Or somewhere else?

Pic of one of the trucks.

u25Btruck

I am a bit of a klutz - well, more than a bit - don't want to go opening up things I don't need to.

Thanks for your help.

David

Attachments

Hide
Images (1)
  • u25Btruck
Last edited by NKP Muncie
Original Post

Replies sorted oldest to newest

VB Vernon BarryOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Again, to be clear, when you take out the motor mount screw to truck- then the entire truck can come down off the diecast motor mount pivot- except for the wires holding it up. Just warning you now if you intended to not go down that path. I use the wheels to rotate and pull the worm on the motor back into the truck when assembling- especially if you have the shell still on and the motor is basically just sitting in the chassis.

I'm a believer, if you are going to take the time to grease the trucks- go the next step- open the shell, check the smoke unit, oil the fan and so forth as a complete end to end maintenance. But that's just my opinion.

Add Reply

Views: 232
Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×