Skip to main content

Replies sorted oldest to newest

The STM2 has two modes: single wire which requires the switch to have a DC output where the polarity is reversed to indicate through/out position (the switch controllers use red/green LEDs), and two-wire mode where a voltage on either of the two inputs provides the switch position to the STM2.

IIRC, the MTH Realtrax switches use incandescent lights so you'll need the two-wire mode.  Try the two-wire  Atlas example in the owner's manual.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×