I have a late eighties Lionel 18000 PRR B6 that I am converting to TMCC. For sound I'm using a RS2.5 board. I have been on the Lionel site nearly all day trying to find a RS4 board for a small loco that might be suitable for use in an 0-6-0 loco. My plan when I find a suitable RS4 board is to pull the PIC and ROM and install them in my RS2.5 board. I tried to find a board for a PRR 2-6-0 mogul they are Legacy and won't work in my RS2.5 board looks like all the RS4 boards for moguls are sold out. Does anyone know a RS4 board and part number that is in stock for a 2-6-0, 4-6-0, 0-6-0, 4-4-2. Trying to get the order in for the sale and having no luck finding a suitable small loco board. Rather not use an 0-8-0 they were far larger than an 0-6-0 larger boiler, higher pressure, larger cylinders and sound much different. Appreciate any advice. j
There are several RS4E boards for 2-6-0 Moguls that show in stock. RS4E is the same as RS4 except there is more dialog available and in some cases the loco sounds are a little better. The RS4E boards will work anywhere the RS4 boards will.
Bob thanks, your affirmation that they were indeed in stock. that caused me to search for the board directly rather than looking for the locos they might be in and then finding the part number off of the loco part list. I don't know why but I have always searched for the loco the part might be found in. This is so much easier. Thanks again, you taught me two things ! j
Happy to help.