Skip to main content

Features:

Dual Vertical Motors with Brass Flywheels

3 Position E-Reversing Unit Linking Both Units (Powerlink)

8-wheel Drive

Lionel RailSounds Digital Sound

TrainMaster Command Control

PROBLEM - NEED HELP !! Engine runs great, forward and reverse.  Illuminated well, horn whistle is good, BUT engine comes to a complete stop with a full idle and illumination and then minutes later will take off on its own.  Note - I am running these engines with a MTH Z-4000 transformer.  I am also running other K-Line engine with the same transformer and no problems.

Email: frank.ranzino@comcast.net

Thank you for your input.

Frank

 

Original Post

Replies sorted oldest to newest

Thank you for answering. Sorry it took so long to get back to you.  Working long hours due to weather.  21 Volts in Neutral (1-3 AMPS) with it idling waiting for it to run.  Starts to run and voltage drops to 15V and amps up to 8.2 continues a little bit and then stops again and returns back to the 21V.  Pressing direction, horn, whistle doesn't do anything.  It has a mind of its own.  Afraid to run it any more for fear of damaging engine.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×