Skip to main content

Hello all, ive been busy trying to recreate a layout or a part of one i saw on youtube, the one the guy built to simulate the mountain in the PE.
Now i have purchased RR track software and i still havent been able to recreate it evenly. I am using 036, 048,060 fastrack pieces. This is beginning to hurt my head. Have any of y'all tried sucessfully to do something like this and if so could u post the plan??
Original Post

Replies sorted oldest to newest



This is only two levels up but maybe it you can pick it up from here. It starts with 60" then 48" and last 36". The first jump is 6" then 10" from level at the top. The circles all need to have a common point to change diameter from. It would seem that you could keep the 60" radius as your maximum by adding some straight sections in on the bottom to clear the first level going up.

C

Attachments

quote:
Originally posted by Gandalf97:
Also... There was a P.E. layout track plan published recently that did a couple loops around the mountain but the rest of the "spiral" was an isolated section of track for the elf hand-car. I am looking for that plan too because I have been unable to find it again.


I THINK that was in CTT, either December 2011 or January 2012.
quote:
It looks to me like he made a clever use of O60, O48 and O36 as he went up around the mountain. You can see where the third level slightly overhangs the second level (look on the right side of the video at the 13 sec mark.) I've done the same in my recreation.



James... that is a very good design! It looks like it's really close to the one in the video. I thought I also detected some straight sections within the curves, but it's hard to tell in the video.

C
quote:
Originally posted by nickaix:
quote:
Originally posted by Gandalf97:
Also... There was a P.E. layout track plan published recently that did a couple loops around the mountain but the rest of the "spiral" was an isolated section of track for the elf hand-car. I am looking for that plan too because I have been unable to find it again.


I THINK that was in CTT, either December 2011 or January 2012.


Yes, thanks for the pointer! That was it.
Hello all again, thanks to everyone for your response &ideas. Have been busy w/family. Im am concentrating on scatch bldg the north pole village rt now.
After looking at Charlys layout idea earlier, i went back to rr v5 and have since been able to layout the spiral. My laptop screen went out so i cant post it yet, but as soon as it gets back from shop i will.

I went back and watched that video over & over, and i did notice how part of his mountain overhangs the lower track. I realized thats part of the charm of his layout.
Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×