Skip to main content

Looking at purchasing a new MTH DCS Commander or Remote .  My  question is does it work with all PS2 and 3 engines.  I've  watched enough videos to know how it works however no one covers what engines will work on this system. I've seen some articles that say  5v PS2 engines won't work and then someone says they will. Any help is deeply appreciated, Thanks

Gary 

Original Post

Replies sorted oldest to newest

Gary,

All DCS engines will work with the following:

  • DCS Remote and TIU
  • DCS Application, TIU and WIU
  • DCS Remote Commander
  • DCS Commander
  • DCS Explorer.

DCS Book CoverThis and a whole lot more about DCS is all in MTH’s “The DCS Companion 3rd Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store!

DCS Book Cover

This and a whole lot more about DCS WiFi is all in MTH’s “The DCS WiFi Companion 2nd Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store!

DCS Remote CDR will run one engine that has been factory reset to default address.  It inputs AC power and puts AC power to track.

If you go with the DCS Commander, it can run more engine simultaneously, but it inputs AC and output DC power.  It is designed to run HO, but will work with O but the power out is limited and you have to decide to run DC power to the track.   G

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×