Skip to main content

After adjusting the throttle on my ZWC transformer the pin on the connector for the 90 w brick broke off in the transformer when I was reconnecting the brick

Is there anyone out there who could make this repair?

If I move the jumper over to the broken connector plug and plug the brick in where the jumper is now will that allow the inside throttle to function?

See attached picture.3D057354-2A08-432E-A911-BF8E5A80B914



Richard Gonzales


Images (1)
  • 3D057354-2A08-432E-A911-BF8E5A80B914
Original Post

Replies sorted oldest to newest

Add Reply

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
Link copied to your clipboard.