Skip to main content

Replies sorted oldest to newest

Early Protosound (QSI) will typically not run or not run well on anything but "old-school" transformers. PS1 came out before all the modern transformers were around. Sine waves, chopped or not (I forget), not compatible with OSI/PS1. Your loco is probably fine. I have an old scale MTH PS1 ATSF 4-8-4, not yet upgraded to ERR/TMCC, that will not move on anything other than my old Lionel 1033. Runs fine on that.

Upgrading to modern electronics (such as ERR Cruise Commander - easy to do) or downgrading to an old transformer should do the trick. Running your transformer through a Lionel TPC300 or 400 remote throttle may "fix" it. There may be other tricks, but I don't do conventional running any more.

Someone here will know more.

Last edited by D500
joe krasko posted:

Thanks for the info...makes sense now that i think about it....i guess i'll keep it..again thanks for the info... 

Joe, I hope you do keep it. This engine was way ahead of its time. MTH added very little other than command control to the later versions. I upgraded mine to PS2 and added a few more details to bring it up to current offerings.

 

Pete

Last edited by Norton

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×