Hot Glue guns - Thoughts and opinions

I purchased a 100W glue gun about a month ago online for under $30. My first use was for clump foliage scenery, and it did a nice job. The wax does get extremely hot and will still burn your fingers 10 or more seconds after application--as I found out the hard way. And care must be taken when releasing the glue trigger to avoid leaving tiny spiderweb strands of resin. For the price I think it's a handy tool.

I’m using a Stanley standard 2 temp glue gun

I really like it because it’s fast virtually no set up time 

Hot setting will really burn you so be careful

I think it was around 25 bucks

Suggestions

always leave it with scrap underneath cause it will drip and the longer sticks 10” seem to work better 

Im making a stand for it out of drape hardware

I like the Ryobi cordless one.

Easy to work on the layout and uses the same battery as my other cordless Ryobi tools.

Believe it or not, Home Depot has better pricing than ebay or Amazon on these

Don't apply to skin hot glue hurts.

I always buy cheap ones at honey lobby lasts for 10+ years 

@Lionelski posted:

I like the Ryobi cordless one.

Easy to work on the layout and uses the same battery as my other cordless Ryobi tools.

Believe it or not, Home Depot has better pricing than ebay or Amazon on these

I’m with you on this. I bought mine from the Direct Tools Factory Outlet in Greenville, SC. Believe me cordless is always better with a glue gun.

Scott Smith

I use hot glue at work for a variety of reasons. I use a Dewalt plug in and a Ryobi cordless. Know that the hotter the glue, the more strength. Also, there are 3 types of glue sticks: clear opaque general purpose, yellow slow-set for wood, and Arrow brand slow-set super strength. (and it is amazingly strong!!)

I’ve always used a cheap glue gun from a craft store that’s always worked fine. I may look into a cordless Ryobi I see how it may be more handy to use. 

Thanks to everyone for the tips and suggestions. Learned some valuable stuff today!

I do like the idea of cordless to break free from that annoying power cord. The larger 18 & 20 volt cordless are just a little too big for working in tight spaces but I am still considering one for other layout and general household use.  I have Black & Decker and Milwaukee cordless tools. Couldn't find anything for Milwaukee and the only Black & Decker model made can't be found anywhere. If anyone has a line of that Black & Decker cordless glue gun I sure would be interested: B&D BDCGG20C

Also looked at some of the cheapo USB rechargeable glue guns but there are so many, and they all look about the same. Reviews on them were all over the place. If anyone has personal experience, I'd like to invite you to share it here.

I did find this "semi" cordless model that runs on the mini glue sticks: Surebonder CL-195F

It's unique because you heat up the gun in the corded dock and once it is removed, you can use it for about 2 to 3 minutes before it needs to be heated up again.  The tip looks like it would also be able to get into some tight spots.

On the cheap side of things I found this Arrow dual temp gun: Arrow GT20DT

For 10 bucks it looks like it should be okay and i wouldn't be out much if it turns out to be less than desirable. However, the tip looks like it could really be the "Star Trek" of tips and appears long enough to reach those tight spaces.

@Lionelski posted:

I like the Ryobi cordless one.

Easy to work on the layout and uses the same battery as my other cordless Ryobi tools.

Believe it or not, Home Depot has better pricing than ebay or Amazon on these

Actually, that doesn’t surprise me. Amazon’s pricing algorithm can throw up some pretty surprising numbers, on occasion, especially for things in short-term demand 

I use the small ones most of the time as I'm usually inside a locomotive or rolling stock.  I typically buy one for $10-15, they usually last three or four years.  I bought my most recent one a couple years ago on Amazon, it's actually been a real find.  It almost never leaks, has a folding stand that really works, and gets into tight places.  I always keep one or two in the drawer in case of sudden failures I won't be stuck without any tool.   This is the one I speak of, I've been quite happy with it's performance.

TopElek Mini Glue Gun Kit

I'm going to try this one...might be too puny as to heat though.

https://www.amazon.com/TOPELEK...588256450&sr=8-2

I read the reviews and also my experience with small built-in batteries makes me leery of this little battery powered units.  My gun will be sitting energized for extended periods at times, and when I want glue, I want it now!   Any battery powered tools I buy I look for removable batteries for easy of replacement.

if you want to stick to anything wood, metal or Plastic I use  Steinel HiPur polyurethane hot glue.

Purchase in small amounts that you will immediately use because it has a limited shelf-life. 

However, there is nothing like it on the market. It is not hot wax at all. I fast dry it with an inverted  can of air compressor. 

You need to have the glue, gun and heater.

The Titebond HiPURformer glue gun PUR dispensing system complete with PUR glue gun, glue gun heater (base) and detachable power cord. PUR hot melt offers some distinct advantages over traditional glue sticks including a strong initial tack and a bond that continues to strengthen over time as the adhesive reacts with moisture in the air. Polyurethane hot melt is also good for bonds that need to be weatherproof and adhering difficult substrates.

Here's a pretty good overview of that Titebond system. Definitely best for specific projects in a timely fashion.

https://www.bing.com/videos/se...5B94EB&FORM=VIRE

Just remember I TOLD YOU ALL.....Short shelf life......

I though at $9 a tube, I'd keep a few around when I needed them. NOPE!

And sometimes the ones you buy from AMO-ZONNIE are old and not fresh. I've had better luck buying from wood-crafting stores.

Plenty of other solutions I think, stuff that has a short shelf life doesn't normally find it's way to me unless I have a specific application that I need it now.

The applications for glue guns are endless. I have a few bu prefer my newest two temp unit as it is also drip-less.

i use an arrow electro-matic my mom passed mine down to me when i was a kid, it’s not pretty, it’s bulky, heavy, and takes a while to heat up, but i love it. 

I never used, or even thought about, a hot glue gun until this year when I saw one at the home of a very good modeler. When I asked him about it, he told me how useful it is. He had an extra brand new Surebonder hot glue gun and sold it to me for 10 bucks.

I wish I learned about hot glue guns a long time ago. It makes gluing things together so much more fun and much easier because the glue starts to harden in a few seconds.  I highly recommend them. Arnold