Skip to main content

Hi guys,

Sorry for the cryptic description but it’s all I have.  The locomotive in question is my OMI Amtrak P40DC which is pictured in another thread I posted recently.  The notes I received with the locomotive indicate that the install was done approximately 10 years ago with a NCE decoder for motor control and a Tsunami for sound which I guess was how it had to be done in O Scale back then.  I have several recent Sunset diesels with QSI and love how the twice F6 for start-up and twice F9 x 3 for complete shut-down works.  Can this be done with the older Tsunami?

Thanks,

Chris

Original Post

Replies sorted oldest to newest

If you have both decoders, I don't know which one it will read.    You need to turn one off to read the other.   I have some installs like this and I put on-off switches on the underside of the loco so I can turn off either decoder to program the other.

I am guessing it is reading the DSD.    The D408SR would most likeliy be ver 35 or 36 in my experience.   I have not seen other versions of the 408.   

I just checked, I have a Soundtraxx, that I thought was a DSX decoder, and the manufacturer code comes up as 141 also.   The version is 18 according to decoderpro from JMRI.    CV 38 is set to 64.    So you are reading the soundtraxx decoder for those results.

Last edited by prrjim

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×