Skip to main content

I'd like to tie in a 2nd powered A unit to a PS3 A unit running in DCC mode from a battery.  Rather than running both A's as PS3's that are lashed together, I want the 2nd A motors to be tied to the first A unit.

How much current can run through the PS3 board in DCC mode?  In my test below, 4 motors are running off a 14.8 Lipo Battery and settle in between 1.5 and 2 amps.  But the startup amps can get as high as 7 or even 8.  Is that too much of an initial jolt for the PS3 board?




Videos (1)
Current Test
Original Post

Add Reply

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
Link copied to your clipboard.