Skip to main content

If you don't pull overly long trains, one Cruise Commander 4.1 can support 4 motors.  I've been running MTH Sharks, F-3's and Centipedes as well as a pair of Atlas RS-1's for years with a single Cruise Commander wired to all 4 motors in parallel.  I make sure that the aluminum heat sink on the Cruise Commander is securely screwed to the sheet metal chassis of the locomotive and I use heat sink grease on the joint.  I run 10 to 12 car trains on grades as steep as 3.5%.

 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×