How to cover edge of layout

1/4" masonite cut in narrow strips. You can paint it black to create a nice clean frame to the layout. 

I used 1 x 8 and 1 x 6 pine.  Unpainted at the moment, but probably a dark color down the road.  I used 1 x pine as I had several pieces left over from work around the house.  Different sizes because I have some pullout items under portions of the table that the 1 x 8s didn't allow clearance for.

One issue I had is angle cuts on the 1 x 8s, my miter saw isn't big enough so had to finish cuts with a hand saw and lots of filing.  The 1 x 8s give better coverage however, especially with 2" foamcore + 3/4" plywood + 2 x 4 framing.  The masonite many use on the forum does look really good and I would recommend that as well.

Fascia and skirts.    Click on the underlined phrase for a slideshow.  Red Oak trim with an OG cut top edge. Boards slightly longer than the layout framing to cover the top of the skirts and the support rods.  My sweetheart, (46 years), did the skirts for me.

Early construction photos of my attic layout. This is before I put on the tops and laid the track. Currently, I'm wiring switches.

Right now there's construction mess everywhere. Hopefully later this year, I'll get everything cleared. I want to get pictures before buildings get set.

On the unfinished side of the attic, I used white PVC to trim the edge of the plywood and form a curb. I can't afford to have trains bouncing off the floor!

I have a combination of trim and coverings around my layout along the viewing aisles:

I mounted vertical sheets of 3/4" plywood, painted green, to provide a barrier against children reaching or crawling underneath. Each is held in place by two "carriage-bolts" which I can remove easily when I wish to gain access to the storage space behind. These vertical boards are approx. 3" above the layout level itself, to provide a safety edge against trains falling off to the floor.

I used fabric in places where I want quick access anytime. There are shelves and file cabinets immediately behind the drapes . Trim strips and molding complete the tops of these areas.The short piece of plastic trim seen here

is slightly curved to allow for the swing-open of the cellar-to-garage door (you can see its doorknob in the lower righthand corner of the photo immediately above.)

FrankM

P.S. I admire how beautifully  Tom "Gilly" and Mike CT have finished-off the fronts of their layouts. Both are very, very well done, IMHO.

To the OP:  Great topic and clever way to see some pics of our layouts.   I need to add a facia board to my layout and I'm planning on using 4-5" wide strips of flexible masonite.   I then plan to glue images of retaining wall to the masonite not unlike a backdrop.  Will post pics to this thread.

Mike CT posted:

 

....Boards slightly longer than the layout framing to cover the top of the skirts and the support rods.  My sweetheart, (46 years), did the skirts for me.

What did you use for support rods for the skirts, Mike?

Allan Miller posted:

Mike CT posted:

 

....Boards slightly longer than the layout framing to cover the top of the skirts and the support rods.  My sweetheart, (46 years), did the skirts for me.

What did you use for support rods for the skirts, Mike?

My sweetheart purchased the small curtain rods we used.  Cup hooks and the rods.   Most likely the stuff came from JoAnn Fabrics, she spends a lot of time there.  Stuff would also be available, Walmart.

Expandable curtain rods. There is a range for which each rod can be used.  Longer spaces would require longer rods.

???  LED rope lighting ???

Similar to what Mike posted above.  Red oak boards (4 1/2" x 3/4") with a 1/4" roundover on top.  Top of boards is 3/4" above table top to catch any stray tools, scenery, rolling stock or motive power.  I think the finished oak gives the layout a more furniture-ish (made up word of the day) look.  Skirting is something my mom did as a Christmas gift.

I also like what Dave, Mike and Gilley have done.

Tom

Mike CT posted:

???  LED rope lighting ???

RGB LED

RSJB18 posted:

1/4" masonite cut in narrow strips. You can paint it black to create a nice clean frame to the layout. 

That's exactly what I do, and this is what it looks like:

Smooth flowing curves, not a square corner or even an angle anywhere in the room.

I used 1/4”x2”x4’ strips of  pine stained cherry. It sits nicely on top of the Mianne benchwork and exactly covers the plywood top and 1” foam. Originally I used 1/4”x4” strips but didn’t like it.

SUPERCHIEF, regardless of what you decide to use, do not allow your fascia to touch the edge of your OSB or foam. If you still have bench work to build, build it slightly wider then what the surface material will be. Or, if this is finishing work, you can glue dense cardboard to the sides of your 2 x 4 frame work to shim the fascia out away from the surface material a bit. I use the cardboard dividers that are used to separate the wine bottles in a box of wine. (Buy your wine by the case or hit up the state store when they put their trash out. ) When your trains are running, the edges of the surface material contains allot of condensed vibration. If the fascia is installed tight up against the edges of that material, the fascia will turn the vibrations into vertical sound waves that are a higher pitch then the horizontal sound waves we get emitting upward above the layout and downwards under the layout.  I learned the hard way after I noticed a change in noise level and had to pull off my fascia to shim it out.  I also saw an increased noise level on my decibel meter app which showed allot more high pitched spikes on the graph. After shimming it out, the spikes decreased. Installing heavy skirting, when your done, will also cut down the noise coming from under the layout.

David Minarik posted:

Mike CT posted:

???  LED rope lighting ???

RGB LED

Red Green Blue (RGB) LED.   ?? So you can change the light color with one of the small handheld controllers ?? 

Mike CT posted:

David Minarik posted:

Mike CT posted:

???  LED rope lighting ???

RGB LED

Red Green Blue (RGB) LED.   ?? So you can change the light color with one of the small handheld controllers ?? 

Yes!

Cool

Mike CT posted:

Cool

and cheap!