Skip to main content

I have the Lionel 2003 version SD40T-2 UP road number 4004, Lionel item 6-28540. While running it this afternoon I noticed the engineer figure is loose, so I want to open the body and re glue it.

The owner’s manual has no guide for opening the body, and the exploded parts diagram is not helpful.

Before I go randomly unscrewing things, I thought I’d ask for help here from someone with experience to give me some guidance, please.

Last edited by ByronB
Original Post

Follow up just in case someone is wondering how to get the body off. I still don’t know!

Turned out I did not need to remove the shell. When looking at the loco I realized that the cab windows were modeled halfway open. So even though the figure was upside down and backward, I was able to use fine point modeling tweezers to maneuver him back into position where a small dap of glue kept him seated.

Two observations of interest. The figure itself is not styrene or ABS, but a soft flexible vinyl-like material. So you need a multi purpose cement for glue. Also, the figure is very poorly painted! My main hobby is painting military miniatures for gaming, so it was really apparent to me how poorly he was painted. But, the paint job is definitely “good enough” for what little you can see of him, so I left it. But had I opened the body and had full access to the figure, I think an hour at the paint table would have produced a fine looking engineer.

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×