Skip to main content

Replies sorted oldest to newest

Bob-

It sounds like your switches are powered by a separate fixed voltage source; check to see if that source is plugged in and/or not tripped. Also check for a loose or broken wire, possibly near the transformer's binding post.

Some users use the inner dials on a ZW for fixed voltage; if you are using a ZW check to see the dial is set to the correct voltage.

-John

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×