I have a IRV-2 sensor system (6-85296) that I use on my layout that loses power after a few seconds( the red indicator light goes out and the light on the sensor track goes out). I replaced the power supply / DPI cable system with a new one ( 6-81499). Same issue. I tried a different IRV-2 module that I know works because it works in my shop. It does the same thing . If I plug the power supply into my wifi module (6-81325) it does the same thing ( red light on WiFi module goes out. . What is the next trouble shooting step. All of the connecting cables seem to be secure.
Interesting note that even if the red power light goes out on my wifi module the wifi still works.
What am I missing here. Probably something obvious.
I am able to program the engine ID in my shop. I am able to upload the engine information to my shop legacy base using the shop IRV-2. Red light on IRV-2 stays on.
separate system.
I am able to program the engine ID at into my layout legacy base. I am not able to upload the engine information to my layout base via the IRV-2 programming track on my layout. Red light on IRV-2 shuts off.
The layout system did work at one time.
Is this possibly a legacy base issue???
Any help would be greatl appreciated.
Rich R
