Skip to main content

Replies sorted oldest to newest

The original Ives 201 power house (not the re-badged Lionel 435/436) has not been reproduced.

And sure, they come up for sale. I got my 1912 version on a table in the blue hall at York a few years back.  In good shape they are a scarce, high-ticket item, so it's not surprising I have seen more of them in sales by the auction houses like Stout or Maurer.  The chimney is in several parts, including the cast iron top, some or all of which are often missing. Mine has its wood base with the coil transformer mounted on it inside.

david

Ives 201 power station

Attachments

Images (1)
  • Ives 201 power station

2924FBA3-2388-421B-9CD5-D28052F4A1B4Time for an update...as I have have no talent in making things. Through members of the Ives Train Society, I found a fellow who was able to fabricate a new chimney and roof assembly in tin.

His paint work on both is so well done it’s hard to differentiate from lithography.

it wasn’t cheap, but well worth it to be able to put this unique Ives piece back together after so many years.

Attachments

Images (1)
  • 2924FBA3-2388-421B-9CD5-D28052F4A1B4
Bill Clay posted:

2924FBA3-2388-421B-9CD5-D28052F4A1B4Time for an update...as I have have no talent in making things. Through members of the Ives Train Society, I found a fellow who was able to fabricate a new chimney and roof assembly in tin.

His paint work on both is so well done it’s hard to differentiate from lithography.

it wasn’t cheap, but well worth it to be able to put this unique Ives piece back together after so many years.

That's wonderful Bill! Congrats!

George

Excuse the tangent hijack, but I feel I have the crowd for this. So before it fades.... Does anyone happen to have a Jefferson Powerhouse to show off? I've only seen two, neither very complete. Hardboard and redbrick paper litho, "on" light over the door. Sheet metal throttle just like the little whistle shack/powerhouses. But hidden better by bushes. I thought he door light being on when unit power was on was subtle genius as a kid.

Saw that another Ives powerhouse sold yesterday for $1200. Plus a 25 percent buyers fee! This was from Bertoia’s in Vineland NJ. Looked to be a 200 as I didn’t see any terminals on it. Just made for batteries. Also it had a replacement smoke stack and it had the vertical shingle pattern on its roof.  Hope it found a good home.

Hi George, Here’s the measurements of my Ives 201 powerhouse...

lenght 9 1/4”, x 6 1/2” wide, x 6 1/2” tall. Distance from bottom too peak of roof is 9”. Roof angle is 45 degrees. Smoke stack is 9 3/4” tall. It sits on a base which measures 2 1/2” long, 1 1/2” deep, by 3 1/2” tall. 

Hope this helps, any other info needed, let me know.

 

 

 

I finished editing the photos and mocked them up in drafts this weekend.

7398B1AB-F8EA-45B4-9612-7F7B67B743D3

I used these to check the fit and size. I will also use them as templates to cut the tin.

I bought some tin sheet at Menards. This is a large sheet for drip pans. The gauge is lighter than some of the ductwork sheets.

22E2F335-4F3C-4BE0-9A58-B1CBEA277BB4

Next step is to print the photos on photo paper cut them and spray them with fixit.

George 

Attachments

Images (2)
  • 7398B1AB-F8EA-45B4-9612-7F7B67B743D3
  • 22E2F335-4F3C-4BE0-9A58-B1CBEA277BB4
Last edited by George S
Bill Clay posted:

George, looks great! Off to a fantastic start! I see you chose the later version with the vertical shingle pattern! Horizontal or vertical looks great. Trickel has the casting for the chimney for the finishing touch. Please keep us posted here!

 

Good to know on the chimney. I didn't see it in his catalog. Is this the top cap?

Thanks,

George

Here is a Google Drive link to the files I used. Ives Powerhouse Folder

The PowerPoint has all of the files sized and ready to print on slides. I used HP Premium Plus Photo Paper, an HP inkjet printer, and Krylon Preserve It Gloss Spray. I printed the slides on the best quality setting with the printer set to Premium Plus paper and I used the borderless printing setting. 

The chimney was a challenge. I would do it over, but I only have so much time to work on projects like these. I found a piece of heavy pipe that I cut to fit in the bottom of the chimney so it wouldn't fall over. I may still add a smoke unit, but the cotton batting works pretty well.

Merry Christmas!

George

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×