Skip to main content

Replies sorted oldest to newest

It would take a lot of work to make it fit. If you are doing this to get a particular road name/paint version for a Lionel chassis, you would be better off just getting an old Lionel shell and repainting.

The K-Line/Kusan shells came all the way down to cover the frame/chassis. Lionel's FA1s were designed to have the frame be part of the side of the body. So, the sides of the body are noticeably shorter. After modifying the K-Line shell at the front and for the rear screw-hole, the body would sit too high on the frame/chassis unless you cut it down. Too much work as I see it.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×