Skip to main content

Replies sorted oldest to newest

polekat62 posted:

 

I have acquired a k-line caboose 3 rail and would like to convert it to 2 rail . Would anyone know if Atlas 2RL Caboose trucks will fit?

  

Might be helpful to know which caboose and perhaps even supply a photo of the underside with and w/o trucks attached.

Last edited by mwb

As I recall, you need to fabricate a bolster for the K-Line cabooses. You didn't say which model it is, but the Atlas Caboose trucks should work fine as you can shave the mount down a bit if you have to. If it's an older woodsided model, the MTH wood beam trucks should work for you. They're designed to mount to MTH cars which don't have conventional bolsters and might work under a K-line car.

Hope this helps.

Dale, do the K-line trucks have a flat bolster joining the sideframes together?  If they have a raised section like MTH or Atlas, yes - replace them with Atlas trucks.  Anyway, those K-line trucks are a twin coil-spring freight car type.  The Atlas caboose trucks with leaf springs come in 2 types - friction bearing or roller-bearing journals.  Choose the one you prefer for the era you're modelling.  

I asked about bolsters above.  If the bolsters are 'flat', regular 2-rail trucks should work, trouble is I don't know what is currently available for cabooses - anybody know?  If I had to do it now I'd probably replace the coil springs in a freight car truck with Pecos River p/b leaf springs which I have in an old, dusty bag.  Yup, they're no longer made.  

When you've sorted out the trucks(!), get the Kadees on and look at some good pics of the caboose ends to see if adding a bit of end-sill detail would put a smile back on your face .  Oh and let us know how you did, it's got a good superstructure!

Jason

I looked at the k-line trucks and they do have a raised section. I looked on rr picture archives and it showed bc rail caboose #1875 with roller bearing trucks with leaf springs so I will order from Atlas #7068 roller bearing trucks with leaf springs and electrical pickup.While I have the caboose apart, I think I will replace the bulbs for LEDs and eliminate the smoke unit. Thank you all for the great info and I will post update of my caboose project.

 Dale

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×