Skip to main content

Have a K-line Alleghany that works fine in Command, but when running in conventional it will only crawl.  Can't get it to run normal speed.  Did a Reset with TMCC, set to 32 speed steps.  Cleared any speed limits.  Still won't run fast in conventional.  Any alternatives or does the motor driver need to be replaced.   G

Original Post

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×