Skip to main content

I also own a K-Line K3688-4449C SP Daylight 4449 Locomotive and it runs great with the Cab-1 controller but when I try to use my Legacy controller I have to turn the controller many many times just to get it to move. Does anyone have any suggestion's on how to get this engine to run on the Legacy controller?

Original Post

Replies sorted oldest to newest

Hello CAPPilot I was using the settings for Control set as TMCC and RS for sound. I received a message from gunrunnerjohn to set it for Cab1 or R100. I will try these setting and see if that works and I'll  let you know what happens. I hope setting it for Cab1 will correct my problem. Do you think that I should use RS for sound? Thanks for your help.

I have found all my old 32 speed step TMCC locomotives preform like this with a Legacy controller, so I just keep using my Cab-1 controller for those locomotives. 

I have this same locomotive, but my problem is that the longer it's running on the layout, the slower it gets.  I thought maybe it was getting to hot, but the shell is still stone cold to the touch.  And then after a while it doesn't even have the strength to pull a train around O54 curves.  Not sure if replacing the guts with ERR cruse would help or not.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×