k-line milk cars

I don't think the milk car was designed to put the milk cans on the belt as the mechanism does not have enough reach to place the cans on the belt.  I raised the track , Fastrack, slightly and the cans get placed on the edge of the platform.  It's a little crazy to watch, but with each ejected can, the row is pushed forward, one can at a time, and they stay on the platforms edge.

That is because the item you have pictured is only a loading platform it was not designed for unloading. The k-line unloading area was just a flat platform with a railing that was placed on the other side of the track.

NelsonW and Zeke13 are correct.  You want this K-Line unloading platform.

This is an MTH car dropping off milk but it works with the K-Line car too.

Here's a video of K-line's Milk Depot on my semi-permanent layout.  The fact that one can make it to the belt is a rare occurrence.  As NelsonW mentions above, this accessory is meant to load the milk car.

Here's a link to Lionel's product description:     www.lionel.com/products/operat...ading-depot-6-14291/

Here's a link to youtube showing the loading of a milk car:    www.youtube.com/watch?v=hSjKQlFz9C4

thanx  zeke13 the way they were designed ill take your advice  i have plenty cans and that does work