Skip to main content

i have the cars and the platform the remote works perfect to unload cutting my track in to load i see no problem with that very close clearence the tracks have to be right in place my problem is unloading the little gentleman does not place the cans on the conveyor belt track height is correct  im missing some thing cant figure this one out any one have a solution i appreciate kirk

Attachments

Images (1)
  • IMG_0264
Original Post

Replies sorted oldest to newest

I don't think the milk car was designed to put the milk cans on the belt as the mechanism does not have enough reach to place the cans on the belt.  I raised the track , Fastrack, slightly and the cans get placed on the edge of the platform.  It's a little crazy to watch, but with each ejected can, the row is pushed forward, one can at a time, and they stay on the platforms edge.

Here's a video of K-line's Milk Depot on my semi-permanent layout.  The fact that one can make it to the belt is a rare occurrence.  As NelsonW mentions above, this accessory is meant to load the milk car.

Here's a link to Lionel's product description:     www.lionel.com/products/operat...ading-depot-6-14291/

Here's a link to youtube showing the loading of a milk car:    www.youtube.com/watch?v=hSjKQlFz9C4

Attachments

Videos (1)
K-line Milk Depot
Last edited by Zeke13

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×