Skip to main content

So, found this beauty is in a random box with my estate lot. It says Kadee on the bottom. This is another item where I can't find info online.

I'm wondering when this company was in existence and if they are considered collectible, what year/model this might be...

Suzanne

 

 

IMG_6588IMG_6594IMG_6597IMG_6584IMG_6585

Attachments

Images (5)
  • IMG_6594
  • IMG_6597
  • IMG_6584
  • IMG_6585
  • IMG_6588
Last edited by bellymoondrop
Original Post

Replies sorted oldest to newest

The "Curve" is right on the Kadee thing. Looks like your engine is a AT&SF Mikado, meaning a 2-8-2 Loco as in 2 small wheels up front at the pilot (aka cow catcher) (They count the wheels on each side) 8 Drivers (4+4) and 2 on the trailing truck.

You can go on Wikipedia and search for Whyte wheel classifications and get enough info on Locomotive wheel configurations  to make you dizzy, and that's just steam. Knowing the Whyte classification will help you identify what you have, not so much as the importer, but as a start to get to that....and of course the name of the railroad.

Might be a Sunset, might be a PRB (Pecos River Brass) or other. The Warbonnet buffs will have to help you!

Simon

Not to throw a curve into the discussion but, the model looks like it's been modified and made into Proto 48.  If so, you need to make sure you list it as such.  I may be wrong, and if I am, I apologize in advance.Two things would help to clear this up.  First get an exact measurement of the distance between the wheels.  This would be the back to back dimension.  It can be any wheel so do the one that's easiest to measure.  The next dimension would be the thickness of the tire/wheel.  Typically, a P:48 tire is .115" wide.  A set of digital calipers would probably be the easiest tool for getting these measurements.

The modelers collection of tools may have the calipers but there also may be gauges for checking dimensions.  The most common is the NMRA "Flat gauge" but there are others.

Jay

Last edited by Jay C

I see from your profile you are from Nevada.  It may help to have a local O Scale modeler assist with some of this.  I know a few that are extremely reputable and would probably be more than happy to help, especially with identifying some of the items you are dealing with.  Just a thought.

My email address is listed in my profile.

Jay

Strummer posted:
Matt_GNo27 posted:

It looks like the face of the boiler has been mounted or rotated 90 degrees clockwise from the correct position.

And yes, Kadee is the make of the coupler used on this model.

That's right...on both points.

And yes, determining the scale would be very helpful...is it HO or O? It's such a beautiful model, it's hard to tell!

Mark in Oregon

Mark, 

I thought you could tell from the undercarriage, is that correct? I do know that the collector was 99% 2 Rail in his purchases.

Jay C posted:

I see from your profile you are from Nevada.  It may help to have a local O Scale modeler assist with some of this.  I know a few that are extremely reputable and would probably be more than happy to help, especially with identifying some of the items you are dealing with.  Just a thought.

My email address is listed in my profile.

Jay

I sent you an email , Jay, thanks!

bellymoondrop posted:
Strummer posted:
Matt_GNo27 posted:

It looks like the face of the boiler has been mounted or rotated 90 degrees clockwise from the correct position.

And yes, Kadee is the make of the coupler used on this model.

That's right...on both points.

And yes, determining the scale would be very helpful...is it HO or O? It's such a beautiful model, it's hard to tell!

Mark in Oregon

Mark, 

I thought you could tell from the undercarriage, is that correct? I do know that the collector was 99% 2 Rail in his purchases.

Ok, I get it now. I hadn't noticed the "O" on the Kadee coupler box before. Nice engine!

Mark in Oregon

bellymoondrop posted:
Matt_GNo27 posted:

It looks like the face of the boiler has been mounted or rotated 90 degrees clockwise from the correct position.

And yes, Kadee is the make of the coupler used on this model.

Well, my god, y'all see everything. It kept falling out and I thought I'd gently push it in, but seems I did it wrong.

So embarrassing!

 

Don't be embarrassed.     I will be 72 in 35 days, been playing with trains since Christmas 1949 ten days before turning three.   I learn something new every day.  It's a topic where no one can know everything.  You are here for the same reason we are all here.  Wish you could keep them all and we help you build a layout.  Lots of girls play with trains and a bunch are on the forum.   j

JohnActon posted:
bellymoondrop posted:
Matt_GNo27 posted:

It looks like the face of the boiler has been mounted or rotated 90 degrees clockwise from the correct position.

And yes, Kadee is the make of the coupler used on this model.

Well, my god, y'all see everything. It kept falling out and I thought I'd gently push it in, but seems I did it wrong.

So embarrassing!

 

Don't be embarrassed.     I will be 72 in 35 days, been playing with trains since Christmas 1949 ten days before turning three.   I learn something new every day.  It's a topic where no one can know everything.  You are here for the same reason we are all here.  Wish you could keep them all and we help you build a layout.  Lots of girls play with trains and a bunch are on the forum.   j

Wow, that is so remarkable to me, to have a lifelong hobby like that.

I've come across a few I'd like to keep...

Here is a beauty I didn't want to sell: The Queen of the Short Line; Virginia & Truckee!

 

 

IMG_6418IMG_6401IMG_6408IMG_6412IMG_6413IMG_6414IMG_6415

Attachments

Images (7)
  • IMG_6418
  • IMG_6401
  • IMG_6408
  • IMG_6412
  • IMG_6413
  • IMG_6414
  • IMG_6415

Suzanne, based upon your various postings / the pictures above - you have a REALLY nice collection, and to maximize your sales dollars, I suggest that you obtain some advice as to what you have.

As an example, if this is a PSC model that wasn't well built and has been reworked by someone to run well  (group - didn't PSC use "undersize" drivers for a while (.138 -.145 tread thickness / gauge them too tightly ?) - this could be why the treads look thin in the pics / the tender truck shows rework),  then this is a very desirable model, which should bring good money. But you need to know that and describe it. So, if possible, someone who knows O scale should be advising you on the details of the models in your collection.

(Using a suggestion about the model being returned to you) Jay C is someone who has a history in the O Scale community / on line that you can see / review. If he could assist you with someone local who knows O Scale trains to advise you - that should really help you with sales / avoiding issues.

bob3 posted:

Suzanne, based upon your various postings / the pictures above - you have a REALLY nice collection, and to maximize your sales dollars, I suggest that you obtain some advice as to what you have.

As an example, if this is a PSC model that wasn't well built and has been reworked by someone to run well  (group - didn't PSC use "undersize" drivers for a while (.138 -.145 tread thickness / gauge them too tightly ?) - this could be why the treads look thin in the pics / the tender truck shows rework),  then this is a very desirable model, which should bring good money. But you need to know that and describe it. So, if possible, someone who knows O scale should be advising you on the details of the models in your collection.

(Using a suggestion about the model being returned to you) Jay C is someone who has a history in the O Scale community / on line that you can see / review. If he could assist you with someone local who knows O Scale trains to advise you - that should really help you with sales / avoiding issues.

I've gotten 2 local referrals from this esteemed group, one is coming over next week to assess the train. I'm so grateful for all the help. Thank-you, Bob!

Those are sort of "either-or" - there is a difference between Max Gray and USH.  For instance, a Max Gray AC-12 is not worth a quarter of what the USH AC-12 is.

Jay is not that far away from Reno - load up your car and go visit?  There are other serious O Scalers in the Sierra area - the Jakls come to mind, along with Dave Viale.

Bob will appreciate this story.  Shoot, he may even remember it.

The reason I even bring it up goes along with what Suzanne is doing except she's doing her homework and is far more prepared than most neophytes.

There was a friend of ours, an avid O Scale modeler of some note, a Pearl Harbor survivor, a decorated WWII Marine (got out in '45 or '46 as a 1st Sgt, tough as nails, with a heart of gold...unless you got on his wrong side.  One of the most honest and honorable people I've ever known.  He lived in Southern California and was known far & wide.  Many times, as O Scale items were brought into local hobby shops/model train stores in the area, he would be called.  One time he received such a call from a well known shop in Pasadena and it turns out a widow was trying to sell her late husband's collection.  Si examined the collection and asked the lady what she wanted for it.  She stated her price and Si said, it's worth more than that a gave her twice as much as she wanted.  That's how it's done!

There was another time where a modeler took advantage, in a similar situation.  Si found out about it and eviscerated the guy.  From that day forward Si would have nothing to do with him.  Oh yeah, once you were on the bad list, heaven help you.

One of my heroes.

Jay

Last edited by Jay C
bob2 posted:

Those are sort of "either-or" - there is a difference between Max Gray and USH.  For instance, a Max Gray AC-12 is not worth a quarter of what the USH AC-12 is.

Jay is not that far away from Reno - load up your car and go visit?  There are other serious O Scalers in the Sierra area - the Jakls come to mind, along with Dave Viale.

Let me check with my source on this. He is local, thanks!

Jay C posted:

Bob will appreciate this story.  Shoot, he may even remember it.

The reason I even bring it up goes along with what Suzanne is doing except she's doing her homework and is far more prepared than most neophytes.

There was a friend of ours, an avid O Scale modeler of some note, a Pearl Harbor survivor, a decorated WWII Marine (got out in '45 or '46 as a 1st Sgt, tough as nails, with a heart of gold...unless you got on his wrong side.  One of the most honest and honorable people I've ever known.  He lived in Southern California and was known far & wide.  Many times, as O Scale items were brought into local hobby shops/model train stores in the area, he would be called.  One time he received such a call from a well known shop in Pasadena and it turns out a widow was trying to sell her late husband's collection.  Si examined the collection and asked the lady what she wanted for it.  She stated her price and Si said, it's worth more than that a gave her twice as much as she wanted.  That's how it's done!

There was another time where a modeler took advantage, in a similar situation.  Si found out about it and eviscerated the guy.  From that day forward Si would have nothing to do with him.  Oh yeah, once you were on the bad list, heaven help you.

One of my heroes.

Jay

Sounds like a great man, Jay. I'm probably a few months away from reaching the bottom of this treasure but I'll be sad when I get there. It's been amazing getting to know this hobby and the folks who populate it. And it's been an honor to work with this lifetime collection, which has had some truly stellar items in it.

I don't concur.  That is not a MG gearbox.  Either Westside/PSC or Sunset (not 3rd Rail).  MG had a fabricated brass gearbox.  USH had a zmak cast gearbox (the cover was cast also).  Some Westside/PSC, and the early sunset, had cast gearboxes with stamped covers.  From what I see there is a stamped cover.  The Westside/PSC tended to have narrowed tires...like what I'm seeing.  Could the gearbox have been replaced?  Sure.  Bob & I do it all the time.

MG also have, most times, 1/4" diameter axles.  USH had 6mm.

Jay

Oh yeah, the plug going to the tender is either very late USH or Westside/PSC.  The earlier USH plug/receptacle was a little larger.

When I say Westside I include PSC because there was a time when they transitioned from one to another.  Some of the very late Westside used a mini phone plug/receptacle and this ain't one of them.

All things being equal, I say it's a Westside.

Jay

Last edited by Jay C
Jay C posted:

I don't concur.  That is not a MG gearbox.  Either Westside/PSC or Sunset (not 3rd Rail).  MG had a fabricated brass gearbox.  USH had a zmak cast gearbox (the cover was cast also).  Some Westside/PSC, and the early sunset, had cast gearboxes with stamped covers.  From what I see there is a stamped cover.  The Westside/PSC tended to have narrowed tires...like what I'm seeing.  Could the gearbox have been replaced?  Sure.  Bob & I do it all the time.

MG also have, most times, 1/4" diameter axles.  USH had 6mm.

Jay

:::sigh::: 

In all seriousness, I grew up.  It was around 40.

Yes, Si was one of a kind.  He was very generous.  He always welcomed visitors.  I think you had to be male - but I bet he would have made an exception for Moondrop.

I am really pleased you can use the expertise here to help your eBay efforts.  Most of us use the forum to avoid heating up the old soldering iron.  At least that is what I am doing - avoiding semi-useful work.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×