Skip to main content

I am purchasing a kline scale santa fe berkshire from a forum member here. It has tmcc and the kline cruise control and a puffer smoke unit. My question is two part. First about the cruise control. Does it work good in legacy with the cab2 vrs. The old tmcc and cab1 ? Never owned a kline engine with thier cruise in it before. What performance running it in legacy should I expect. 

Second can it be upgraded to fan driven smoke? Would it also need gunrunners superchuffer added? Is it worth the extra effort to upgrade the smoke? 

 

Original Post

Replies sorted oldest to newest

Roger, only you can say if it's worth the effort to upgrade the smoke.  Lots of folks have decided it is, but lots of folks go the other way and decide the puffer is good enough.  K-Line cruise can work pretty well, I have a couple of K-Line cruise equipped locomotives that run very well, but I have replaced a couple of K-Line cruise modules with the ERR Cruise Commander M when they croaked.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×