Skip to main content

The Korber kit bash is finally done. Since I am adding this to my product line there are no signs - will let customer decide. This project started out as a small Korber kit in which the cornices were cut off and the upper wood  second and third floor stories scratched built.

2020-09-10 Korber Kit Bash 001

2020-09-10 Korber Kit Bash 002

2020-09-10 Korber Kit Bash 003

Attachments

Images (3)
  • 2020-09-10 Korber Kit Bash 001
  • 2020-09-10 Korber Kit Bash 002
  • 2020-09-10 Korber Kit Bash 003
Original Post

Replies sorted oldest to newest

Dave:

I was way off base on the paint - went back to notes I made:

"The basic wood superstructure was painted using Rust-Oleum Satin Fossil . Edge details were painted with Rust-Oleum Dark Brown. Once the paint dried I used Micro Mark Railroad Tie and Bridge stain - gray/ brown to darken the color.

The Korber structure was painted with Rust-Oleum Flat Brown then oversprayed with Rust-Oleum Flat Red to give a mottled appearance. Krylon Satin River Rock was sprayed over the stone base."

I did forget to lightly sand after the steel brush which is why you see some 'dark' spots.

Last edited by Joe Fauty

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×