Skip to main content

I have built the bench work 8x12 with plywood and homesote already to go. I now need to bolt down two loops of standard gauge track-87 and 72 and a third inner loop of gauge 1 track. All the tracks and screws and hardware are ready. I have one terrace station and a couple of smaller platforms and about 7 operating g accessories like Mel’s diner, Car Wash and Fire Station  etc and 12 street lamps. 

What should someone charge to install the above? Tracks and connecting the accessories to the transformers? In NJ? 

An approx price range would be welcome. Does anyone know someone who can do this in Nj? Thanks and Regards. 

Ash Standard 

973-718-1275

Original Post

Replies sorted oldest to newest

If it is your hobby, and you are physically able, you should consider doing it yourself.    It is more satisfying than buying it and you will know how to maintain it as  you go along if you install it.

If you really want to hire someone, ask at your local hobby shop or model railroad club.    There usually a few guys around that will do it for the fun of it or pretty cheaply.

Both responses are right on! Gods intent and Good Advice. Wrong Advice-taker. I can’t hang a picture straight on a wall. Zero skill and aptitude in-line both of you and most of this forum. The bench work was outsourced as well. Shame on me. But it appears I over compensate in my day job to fund this inadequacy. If you gents can refer someone to me in NJ to do this for me for a fair fee, thT would. E great. 

If you are in LCCA or LOTS, ask a few local members to help you in a work session.  Usually a few ham on rye sandwiches and a couple of cold beers will be appropriate compensation. 

Without a location in your profile you are missing an opportunity for forum members to say, "I'll stop by and lend a hand."

  John in Lansing, ILL

Last edited by rattler21

I agree with checking local hobby shops for leads. Also, a local club might have someone willing to hire out.

If I was looking, I would expect to pay $20-25 hourly. (that's about $40 W2 in wage reality)  Trying to pin down an amount, say $200, leaves room for scope of work expectations that don't match up with both sides. I would not expect anyone to do it for free or a dinner unless we were already friends. Then they would probably help out of friendship. 

2cents

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×